Trigger automations – The sensor communicates with a compatible hub to initiate desired actions of Z-Wave devices. Increase peace of mind by automatically turning on lights, sending notifications to your phone and more when a door opens or closes.
Simple calibration – To adapt to various trim styles and activation preferences, the sensor allows easy calibration. The arm adjusts to fit properly and function as desired.
Reversible installation – In addition to supporting all indoor, standard door hinges with removable pins, the sensor is reversible to accommodate left- or right-opening doors.
Long-life battery – An included CR2 battery powers the sensor for up to 2 years. The long-lasting battery provides worry-free, reliable operation. As a battery-powered Z-Wave device, the sensor is not a signal repeater.
Color match – In addition to a complementary design that blends into its surroundings, easy-to-install covers allow the sensor to match any door color or décor. Silver, dark brown and paintable replacement kits are also available.
Indicator light – LED indicator displays status and provides feedback during programming. It also serves as a notification if tampering with the sensor occurs.
Universal compatibility – Z-Wave Plus and all previous Z-Wave generations work together to allow continued expansion of your home-automation network.
Requires a Z-Wave certified gateway - Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, Honeywell, HomeSeer, Vera, Trane, Nexia, ADT Pulse and Iris.
Wirelessly activate scenes or lights when door is opened or closed and send alerts and remote monitor your doors from your Z-Wave enabled smartphone or tablet
Works on all standard doors using your existing hinge and pin (REQUIRES hinge with removable pin) – compatible with hinge pins up to 5/16” in diameter
Reversible for right and left door openings and adjusts to fit door trim (for INDOOR use only)
Requires one (1) CR2 battery (included) for up to 2 years of battery life.
Open the door to home automation with the GE-branded Z-Wave Hinge Pin Smart Door Sensor. When paired with a compatible hub, the smart sensor triggers events and sends alerts when a door opens or closes. Remote monitoring also increases convenience and peace of mind. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, Nexia, Trane and more.
Ready to Use for Left-Opening Door
The hinge pin door sensor is already set up for LEFT-opening doors. You will need to adjust the sensor if your door opens to the right.
How to Adjust Sensor for Right-Opening Door
Remove metal assembly with a short twist counterclockwise.
Remove the screw and cap to reveal the gear. Lift the arm and place it aside for later.
Remove the gear and flip it upside down.
Once the gear is flipped and put in place, turn the assembly 180 degrees sideways. The text should now read "Right".
Place the arm back by aligning the dots (see figure above).
Replace the cap and secure with the screw.
Add the metal upper to the main body by aligning the two reference points.
Re-attach the metal assembly with a short twist clockwise.
Control your lights, fans and appliances, schedule a timed event or create a custom scene from anywhere in the world, at any time of the day, from your smartphones, tablets, PCs and Z-Wave enabled remotes.
Requires 1 CR2 lithium battery (included). Make sure to remove the plastic protector before installing.
Color-match kits are available to match your home's decor. Color options are Silver, Dark Brown, and Paintable.
HOME AUTOMATION PROTOCOLS AND LANGUAGES 101: AN INTRODUCTION
In this smart home guide, you'll discover:
Find out more about automation and how it can add value to the home.
Discover the differences between Z-Wave, Zigbee, Wi-Fi and Bluetooth.
Learn how to make the right selection for your building needs.